What Ansi* cut level do I need?
 |
Risk Level |
Typical Applications |
|
|---|---|---|---|
| A9 | Extreme Cut Hazards |
|
|---|---|---|
| A8 | Very High Cut Hazards | |
| A7 | High Cut Hazards |
|
| A6 | Heavy Cut Hazards | |
| A5 |
Medium to Heavy
Cut Hazards |
|
| A4 |
Medium Cut Hazards |
|
| A3 | Light to Medium Cut Hazards |
|
| A2 | Light Cut Hazards |
|
*American National Standards Institute
Which liner should I use?
|
|
||
| FEATURE | Dyneema®/HPPE | Kevlar® | |
|---|---|---|---|
| Cut Resistant |  |
|
|
| Strength vs. Steel | 15x | 5x | |
| Lightweight | |
||
| Bleachable | |
||
| Heat Resistant | |
||
What coating do I need?
|
|
|
||
| COATING | Polyurethane | Nitrile | Latex | |
|---|---|---|---|---|
| Benefits | Flexible for dexterity and comfort |
Puncture/abrasion resistant and grips when wet |
Thick textured coating for best overall grip |
|
| Applications | General purpose | Oily and wet surfaces | Dry, rough surfaces | |
What gauge do I need?
Lower Gauge
Heavier Weight
- Thicker construction
- Less dexterity
Higher Gauge
Lighter Weight
- Thinner construction
- Greater dexterity
What abrasion level do I need?
Lower Level
Shorter Life
Higher Level
Longer Life
| DESCRIPTION |
ANSI Cut Level
|
ANSI Abrasion Level
|
Material
|
Palm Coating
|
Gauge
|
|---|---|---|---|---|---|
| A2 | 5 | Dyneema® | Polyurethane | 13 | |
| A2 | 3 | HPPE | Polyurethane | 13 | |
| A2 | 6 | HPPE | Polyurethane | 15 | |
| A2 | 2 | HPPE | Latex | 13 | |
| A3 | 4 | HPPE Blend |
Nitrile | 18 | |
| A3 | 5 | Dyneema® Diamond |
Polyurethane | 18 | |
| A3 | 4 | Dyneema® Diamond |
Nitrile | 15 | |
| A4 | 5 | Dyneema® Diamond |
Nitrile | 15 | |
| A4 | 4 | HPPE Blend |
Nitrile | 13 | |
| A5 | 5 | HPPE Blend |
Nitrile | 18 | |
| A6 | 4 | HPPE Blend |
Nitrile | 13 | |
| A8 | 4 | HPPE Blend |
Nitrile | 13 | |
| A3 | 6 | HPPE Blend |
Silicone | N/A | |
| A5 | 4 | HPPE Blend |
Silicone | N/A | |
| A3 | 4 | HPPE Blend |
Uncoated | N/A | |
| A5 | 4 | HPPE Blend |
Uncoated | N/A | |
| A2 | 3 | Acrylic | Latex | 10 | |
| A2 | 3 | Acrylic | Latex | 10 | |
| A2 | 2 | Outer Liner: Polyester Inner Liner: Acrylic |
Nitrile | 13/7 | |
| A2 | 4 | Outer Liner: Polyester Inner Liner: Acrylic |
Latex | 13/7 | |
| A4 | 4 | Outer Liner: HPPE Blend Inner Liner: Acrylic |
Nitrile | 13/7 | |
| A2 | 3 | Dyneema® Diamond | Polyurethane | 18 | |
| A2 | 5 | HPPE | Polyurethane | 13 | |
| A2 | 3 | HPPE Blend |
Nitrile | 15 | |
| A2 | 4 | HPPE Blend |
Nitrile | 15 | |
| A3 | 3 | HPPE Blend |
Nitrile | 15 | |
| A3 | 5 | Dyneema® Blend |
Polyurethane, Nitrile |
10 | |
| A3 | 4 | HPPE Blend |
Nitrile | 13 | |
| A6 | 3 | Dyneema® Blend |
Uncoated | 10 | |
| A3 | 2 | Kevlar® | Uncoated | 7 | |
| A2 | 3 | Kevlar® | Latex | 10 | |
| A2 | 3 | Kevlar® | Nitrile | 13 | |
| A3 | 2 | Kevlar® | PVC Dots | 7 | |
| A3 | 3 | Kevlar® | Latex | 10 | |
| A4 | 5 | Kevlar® Blend |
Nitrile | 18 | |
| A5 | 3 | Kevlar® Blend |
Nitrile | 13 | |
| A5 | 4 | Kevlar® Blend |
Nitrile | 13 | |
| A2 | 4 | Jersey | PVC | N/A | |
| A7 | 6 | SuperFabric®, Polyester, Cotton |
Latex | 10 | |
| A9 | 6 | SuperFabric®, Polyester, Cotton |
Latex | 10 | |
| N/A* | N/A* | Steel | Uncoated | N/A | |
| A2 | 4 | HPPE | Uncoated | 13 | |
| A4 | 4 | HPPE Blend | Uncoated | 13 | |
| A2 | 4 | HPPE | Uncoated | 13 | |
| A3 | 2 | Kevlar® | Uncoated | 7 | |
| A3 | 2 | Kevlar® | Uncoated | 7 | |
| *Not ANSI tested for cut resistance | |||||
10/21/2024 09:58:40 PM;
CNWEB4
-297979704-0/0.00-- 00000000-0000-0000-0000-000000000000
