Uline Logo Wheel Riser Guide

Width
  • Measure width needed to accommodate tires. (See Figure 1)
  • Uline offers 46 cm (18") and 61 cm (24") ramps. If semi has dual wheels, 61 cm (24") wide Wheel Riser Ramps are recommended.
Figure 1
Height

Calculate height needed to elevate trailer tailgate to meet dock.

NOTE: Based on location of rear wheel, trailer tailgate could rise more than ramp's actual height.

Use steps below to determine required riser height:

A + B = C

A = Height of Trailer + Height of Riser Ramp at center of back wheel.

B = Measure length from center of back wheel to tailgate and multiply by rise that corresponds to your ramp and truck sizes:

RAMP HEIGHT 3.6-5.8 METER (12-19 FOOT) BOX TRUCK 6-8 METER (20-26 FOOT) BOX TRUCK
15 cm (6") Tall Add 1.25 cm (1/2") Rise
per 30 cm (1')
Add 0.80 cm (5/16") Rise
per 30 cm (1')
20 cm (8") Tall Add 1.60 cm (5/8") Rise
per 30 cm (1')
Add 1.10 cm (7/16") Rise
per 30 cm (1')
30 cm (12") Tall Add 2.50 cm (1") Rise
per 30 cm (1')
Add 1.40 cm (9/16") Rise
per 30 cm (1')

C = Height of Tailgate where it meets dock.

Calculate Riser Ramp Height Needed
Length

Confirm the length will work for your needs and make your final product selection.

PRODUCT SELECTION CHART
MODEL NO. WIDTH HEIGHT LENGTH LEVEL LENGTH
H-4189 46 cm (18") 15 cm (6") 122 cm (48") 76 cm (30")
H-4190 46 cm (18") 20 cm (8") 137 cm (54") 76 cm (30")
H-4191 61 cm (24") 15 cm (6") 122 cm (48") 76 cm (30")
H-4192 61 cm (24") 30 cm (12") 183 cm (72") 91 cm (36")

NOTE: Guide is intended for docks with flat surface. An incline or decline could affect measurements and product performance.

04/29/2024 01:58:56 AM; CNWEB23 -0-0/0.0-1- 00000000-0000-0000-0000-000000000000